 | | Click image for closeup |
| Power Amp. Made by Crown. (MF.481585)
Crown remains at the front of the power amp pack with their XLS Series! 570W/ch @ 2 ohms, 450W/ch @ 4 ohms, 300W/ch @ 8 ohms, 1,140W bridged mono @ 4 ohms, 600W bridged mono @ 8 ohms. Designed to provide the quality, power, and reliability you expect from other Crown amps with many of the same controls and features for a much friendlier price.
Features sophisticated protection circuitry (from shorted, open, or mismatched loads, input and high frequency overloads), 5-way fault indicator, red LED on each channel that turns on when distortion becomes audible, green signal-present LED that flashes when the level is extremely low (indicating cabling problems), and detented level controls. Mode select switch for stereo or bridged; 3-speed fan; and electronically balanced XLR inputs; touchproof binding post and Speakon outputs; all in a rugged steel chassis designed to handle serious road use. Features: - Features sophisticated protection circuitry
- 5-way fault indicator
- Red peak clip LED on each channel
- Green signal-present LED that flashes when the level is extremely low
- Detented level controls
- Mode select switch for stereo or bridged
- 3-speed fan
- Electronically balanced XLR inputs
- Touchproof binding post and Speakon outputs
- All in a rugged steel chassis designed to handle serious road use
- 3-year no-fault warranty
Specifications: - Sensitivity (volts RMS) for full rated power at 4 ohms: 1.25 V
- Frequency Response (at 1 watt) 22 Hz to 20 kHz: +0 dB, 0.8dB
- Signal-to-Noise Ratio (20 Hz to 20 kHz) A-weighted, below rated power: >98 dB. No weighting, below rated power: >93 dB.
- Total Harmonic Distortion (THD): <0.5%.
- Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) from full rated output to 40 dB: < 0.3%.
- Damping Factor (8 ohm) 10 Hz to 400 Hz: >200.
- Crosstalk (below rated power)_at 1 kHz: 76 dB. at 20 kHz: 58 dB.
- Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced.
- Load Impedance: Rated for 2 to 8 ohms per channel in Stereo, 4 to 8 ohms in Bridge Mono
- AC Line Voltage and Frequency Configurations Available (±10%): 120 VAC 60 Hz, 100 VAC 50/60 Hz, 220 VAC 50 Hz, and 230-240 VAC
- 29.0 lbs.
Crown amps are the royalty of the pro audio world. Order now! Browse Similar Items in:
Stage Power Amps
|
;)
